How Much Concrete Do I Need for Fence Post Holes? Work It Out Per Hole, Then Multiply
Each fence post hole is a cylinder of concrete, so work out one hole first, then multiply by the number of holes.
The formula
Volume = π × radius² × depth, then multiply by the number of holes.
A worked example: eight fence post holes, 10 in wide and 36 in deep
Eight holes, each 10 in wide and 36 in deep, need about 13 cubic feet of concrete, roughly 22 × 80 lb bags.
One standard 10 in × 36 in hole needs 3 × 80 lb bags; smaller 8 in holes need 2 bags.
How wide should the hole be?
Make holes 3 times the post width — a 4 in post needs a 12 in hole.
How deep should the hole be?
Depth should be half the above-ground post height, minimum 24 in for fences; bury one third of the post, so 36 in deep for a 6 ft fence.
Before you pour
Fill the bottom 6 in with gravel for drainage, then concrete to just above ground level, and set posts with a slight concrete dome above ground so water runs off.
If you would rather not do the arithmetic by hand, run the same numbers through a post hole concrete calculator — it totals any number of holes in one step.
Comments
Post a Comment